Recent content by flipper349

thanks didnt think of that being a problem

I changed axles recently and found my jeep leaned to the right side after the swap . I also found that the center bolt on the leaf spring was rusted and broke would that have anything to do with why it would lean?

I was thinking a 2002 its says with a towing package for a I6- 5000lbs and the V8 at 6500. but how does it handle at freeway speeds? I want to got to the blessings again this year and its 250 miles from here also I want to go to pa in june at the bantam jeep festival thanks

I was thinking about buying grand Cherokee with a v8 and I was wondering How does it do going down the road with a wrangler on a car trailer. it should have enough power, but is it too much weight. thank you for your input Phil

HI people I have 95 wrangler that has a torn seat, driver side of course, since I can"t find a original seat to match I was wondering if a person could take the bottom seat cover from a passenger seat cushion and put it on the driver side. Thanks Flip

I've looked on a few sites and couldn't figure out what seals I actually needed I have a 95 wrangler yj dana 30 with a disconnect the driver side seal I used is a national 710068 and for the passenger side which is just passed the disconnect toward the passenger wheel is a national 710202. I...

front end seals, aussie locker, oil and filter change, painted the diff. cover bright orange. made a go pro mount out of a rearview mirror mount, herculined under the front fenders. just busy busy busy.

I wave at all the wranglers, but some people in michigan aren't that friendly specially the people that drive newer jeeps

thanks I didn't think about the compressed part of it phil

so if I took the shocks off and let the axle drop, my shocks should at lease be that long for the most flex

you can get a go pro hero 3 for 200

I used aluminium di-plate and reinforced with angle underneath, I like the use of your latches for a quick release good idea