Recent content by JPNinPA

Not familiar with UK suppliers. With the make and model number of starter should lead to the correct parts. Good luck. Never look down on anyone unless you are helping them up - Jesse Jackson

Is this your keyfob that worked and now doesn’t? Not a spare or replacement? Has the Keyfob battery been replaced? Just confirming this function worked for you and not said to work from previous owner or others??? Also confirming what was done to confirm the battery was good?? When batteries...

If i interpret the pattern diagram the left side marked drive side has the center of the ring gear to the right and outer to the left. You are looking at the pattern of the retrograde angle or backside of the teeth. In the diagram right side marked coast side, the center of the ring is to the...

Take a screwdriver and poke at the frame snd rust areas looking for soft or areas you might poke through. There is a market for replacement sections. You might look harder at those. Like rear crossmembers. Never look down on anyone unless you are helping them up - Jesse Jackson

looks like a simple test to check for oil in your coolant. You may see a bit on top but not know if that puddle is moving or growing. There are other tests. This looks like a simple cheap test method. https://youtube.com/shorts/87mIjSe3qVo?si=l_wM6UHyL51GeZK_ Never look down on anyone...

Not great but I’ve seen worse and was still working. Never look down on anyone unless you are helping them up - Jesse Jackson

And i was thinking green. From the coast side looks thin and deep towards the center and wider to the outside. Im no expert on this. Never look down on anyone unless you are helping them up - Jesse Jackson

Here is a diagram… if it helps. Never look down on anyone unless you are helping them up - Jesse Jackson

Yep. Thats your pinion opinion. [emoji16] Never look down on anyone unless you are helping them up - Jesse Jackson

Check this out. Never look down on anyone unless you are helping them up - Jesse Jackson

Sorry I don’t think I could find it. It came up when mindlessly scrolling. Never look down on anyone unless you are helping them up - Jesse Jackson

Not to freek you out…. But! https://youtube.com/shorts/Uzy_U[emoji637]D[emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]][emoji639]m[emoji[emoji6[emoji640][emoji638]][emoji640][emoji640]]?si=W_MKwfXfxxncjBIz Never look down on anyone unless you are helping them up -...

The axels still turn the pinion with the rear drive shaft pulled. There is no force driving or slowing the pinion without the drive shaft. The movement in the video is both rotational and in and out. Does it move in and out without twist/rotation. Does it move up and down or left right without...

Basic video on torque converter https://youtube.com/shorts/UTVUrETde3E?si=jAsZQpIRdaiybdGU https://youtube.com/shorts/S3lHnZQvtIg?si=sr4tiPpIy-_XEvkh Never look down on anyone unless you are helping them up - Jesse Jackson

Make sure it has a paper gasket on the tip. That sets the spacing from the flywheel. Without it you may crack or destroy it on the first turn. Never look down on anyone unless you are helping them up - Jesse Jackson