Recent content by samg

There are two bolt holes on top of the housing which is how you intstall or remove the poppet balls and springs. Mine for some reason were filled with some sort of liquid metal that i had to drill out. The output shafts have flat spots or notches on them that line up with the bolt holes when in...

The detent balls and springs were removed in order to install the twin stick. I am lead to beleive that the problem is between the poppet ball and the output shaft or something is missing?

I am the proud owner of a 79 cj7. My transfer case will not stay in 4lo. All gears engage and work, but 4lo kicks out in a short distance of driving. I have the case opened up and see no problems or abnormal wear. I have a twin stick on it and it does not matter if in 4wd or 2wd, still the...

I looked underneath the jeep and was not able to see any place for adjustment on the jeep. Would the adjuster be nearer the the shifter or is there something in the linkage that i am missing?

My girlfriend drives a 2001 Wrangler Sahara 4wd with a 4.0liter and an automatic transmission. Recently behind the wheel i needed to put it in 4wd and opted for low range for the gears holdback on a downhill, but when i pulled the shifter back to 4lo the dash still read part time. There was no...

Pardon my ignorance, but what are TREs. I no longer have the scout or scout steering parts. Would it be wise to buy a new scout drag link and use it? When you say longer pitman arm, thats not a drop arm right, just longer overall?

I have recently swapped the stock front end of my 79 CJ 7 for a dana 44 off of a 78 International Scout. I did not shorten the length of the dana44, just moved the hangers. I am trying to use the cj's stock steering box but am not sure how to hook it all up. How have others done this in the...