Search results

Tons of pwoplw run th3 cherokee ones luke you are without issue. I say greae it amd put it back on and see how it is once your other little things are fixed too

i don't have to worry about that kind of stuff here along the coast. my yard is sand so all i get it weeds and junk. it would be super nice to have grass though

Holy cow thats a bunch of money.

No rebuild kit but maybe a similar year chevy s10 blazer works? What does your look like? Also, the crank from a newer cherokee should work too. They didnt really change much inside on the manual four door

Oh, hungry fan got the shroud

Yes, but if you get the axles, you will have to add leaf spring plates to the rear since all rubicons have front and rear coil springs and you only have fronts while the rear is leafs on your cherokee

thats weird that half a quart is causing that issue. usually there is enough extra volume in oil pans to cover a half quart over fill. but that engine is direct injection? if so, that is for sure why its getting so gunked up and needs a catch can. for some reason, direct injection engines...

I found a post on cherokee forums with people having the same issue you do, though. Since its a chevy steering column, they found the same part fits the xj, yj, mj, and also cj, plus many types of chevy vehicles. But ine guy posts he fixed his by drilling out where the silver post goes so it...

I can't say because i never had to take my 87 horn button off.

I would say your best bet is try out your other ideas and see if they work. All that spring and deal does is make a connection when you push the horn button to conolete the circuit so as long as your replacement item doesnt ground out somewhere else, you should be good

yes, if it doesn't shut off then you aren't getting enough fuel pressure, that is true

No, you can easily do that but its only going to come on for about a few seconds when the engine cranks and then it will stop. But you can do the sender test

I was going to say to taje the belt off too

On the three wires from the body, do you know which is power to the oump and which is ground? I imagine black and red? Unplug the pin that is supposed to be for the gage and just get the pump to work. Than you can plug the gage in. If the gage still deflects backwards, their sender is hooked...

yes sir

they are trying to sell you something so they are going to say that. i have run 3 inch lifts on two 87 model jeeps with control arm front ends, the xj and the mj. i have also run 3 inch lifts on two or three zj grand cherokees, which run the exact same front end as the xj and mj jeeps (and...

Not with a 3 inch lift. You can if you want to but you dont have to. The angle of the control arms wont be bad

I didn't do a drop pitman on a comanche with a three inch lift or on a cherokee with a three inch lift. I never had any trouble from not doing it. You have an 87, like my 87 cherokee so you have a high pinion front axle which means you wont run into any angle issues with lifting like newer...

Dang, i missed the lock part. Yup, they need to fix that too

Dang, you have 450k on that jeep? Pretty good. I could have only gone to 300k in a few jeeps. One chevy 1500 i could have gotten the 800k and one 524td bmw could have gotten the 800k but those are all long gone. Now , the highest mile is the 04 ranger with 225k. The jeeps are all 140k or...