Search results

1050976 I'd say check and change your universials...my g/cherokee has no more probs since...good luck! [addsig]

1051337 OK...sorry...this had nothing to do with your conversion...at all...but i noticed you said you have a weber carb?...well my first question is why you want to go to TFI?...is your weber bad...or do you just want the upgrade?...(btw i really hope what you mean by "TFI" is "throttle body...

1051340 mine does the same...i've learned to live with it...but in my cj it's caused by a small opening between the windshield frame and my door frame. i just shove a sock in there once in a while...it's rare i have passengers in that beast in the winter anyway...too cold they say...they'd...

1051344 just make sure the mileage is way under 100 grand if you're buying it used...all that money into a conversion like that is not worth it if the engine's gonna die on you...i attempted it once...but the bellhousing was $400 alone and i gave up.[addsig]

1051345 damn...i thought i was about to make a great deal too!...maybe next time...thanx anyway[addsig]

1053492 ok...well i was taking them off cuz i was replacing the wheel cylinders...i ended up borrowing a friend's torch to lossen up corrosion and they came right off...new lines and everything too...[addsig]

1053749 I did the moser setup on my '85...these shafts were pretty tough until the right bearing moser gives you (timken) wore out real fast and broke up...i ended up losing the shaft as i took a right turn...as for the axles i highly recommend them...i did some serious roading with my locker...

1054151 4.2L?...keep the stock replacement...i've tried centerforce...it definetly grabs better, but doesn't last any longer for a proce so high,...plus it's a bitch getting the bellhousing over them if your coming in from below with it...they're much bigger...the stock one i had last lasted 7...

1049352 Hey, BEEN WONDERING ABOUT THIS 4.0 HEAD CONVERSION FOR MY 4.2....I'VE BEEN HEARING MIXED FEELINGS ABOUT USING A PRE-1991 HEAD...ANYONE KNOW WHAT EXACTLY IS THE DEAL WITH THESE??? CAN I USE IT? I GOT A HEAD FROM AN 87 CHEROKEE FOR $100 WITH VALVE COVER AND EXHAUST MANIFOLD...SOMEBODY...

1050414 I found an 87 cherokee with a strong running 4.0l engine in it...128k rebuilt...and i also own an 85 cj with a 4.2l in it in need of hp and gas mileage...now would i get any real gain outta doing the swap (while also putting my intake and holley carb on the 4.0, therefore eliminating...

1050780 I've got a model 20 rear...the past owner threw in a one piece axle set and didn't grease the bearings (moron huh?) and well the whole outer end heated up, ground down and i got nothing!...since the bearings are aftermarket and unfindable...i temporarily rebuilt an old narrow m-20 with...

1053408 Anyone know how i can unfreeze the nut on the end of a rear brake line...the one going into the wheel cylinder...it's loose off the wheel cylinder...but it's caught on the brake line pretty tight...any ideas???...tried to use force but don't wanna twist/break the line...my last resort...

1054150 I live about an hour south of Albany, or 2 1/2 hrs north of NYC...right along the east side of the hudson...anyone got any clubs around or near here??[addsig]

1054153 the vacuum canistor in my cj is completely rotted out...In attempting to replace it i lost the smaller line, and the bigger line seems to be the only one that made any difference in engine performance...so i plugged it with a large bolt and tied it back...could someone tell me where the...

1055722 trouble!.....so i got stuck in this bilzzard up here in new york this president's day weekend. Went out today to try and get my cj unstuck and in giving it a little hell i got it out...But i guess continual revving at about 3-4 grand made it unhappy...and now i hear a very loud valve...

1056694 well the time finally came when i've decided to trash my 4.2 (at least for a while) and get some b*lls!...My friend has offered me an old Mopar 318 (similar to the 340 and identical to the 360)...for about $300...just needs a cam, headers/manifolds, and a way to mount it in my cj...

1063649 OK so the first cj to come to life was the cj2b and so on....this happened in 1945. Well i came up with an idea that i think EVERYONE on the jeep website might agree on. for the cj's 60 yrs of birth (2005)...they should have a 60th anniversary CJ7 return for a year. That's right the...

1063650 I've been busy...hehe...BEEFY!!!! Check new stuff out below...[addsig]