Search results

Thanks for the red line advice.The motor has been switched and there are some vacuum lines not connected to anything and I can not find where they go.The 4x4 was working when I got the jeep so I had assumed they had them hooked it up the right way.I have been thinking about just rigging the...

So far I have found no vacuum at the shift motor,next step will be to replace the switch.

Thanks for all the input, I was starting to get frustrated I will try these suggestions .

The light does not come on either.I took the Jeep to a steep grass bank and all I get is the back tires spinning.I thought right after I put it back together and engaged the 4x4 I heard it kick in, and It felt in the steering like it had but it did not last.

I just replaced the Vacuum shift motor on my 89 YJ but still no four wheel drive.I have been tracing the vacuum lines and they seem OK,I pulled the shift cover off and checked the lines to the transfer case.I was told the switch might be bad ,but I can't find a switch any ideas as where to start...

I took the vacuum shift motor off my 89 Wrangler YJ, and removed the shaft and fork.I then discovered I had failed to notice what direction the fork was turned when I removed it.I checked on my Chiltons but it does not show the inside of the motor.I hate to put it all back together without...

Thanks for all the good info.I'm replacing the U joints today they were falling apart.Also it does appear that transmission to skid plate mount has a problem it is loose and won't tighten or loosen.Thanks again.

I have a 1989 YJ with a manual transmission,I started getting a vibration while driving that seems to come from the center of the Jeep.I read the other forum post here concerning vibrations but where mine differs is that when I depress the clutch it appears to stop.This about the first time Ive...

I see now that the ones I have I don't think you can add a top to them they are made by best top.There is a pair for sale on ebay item # : 220361663665 sorry Im not computer literate enough to copy and place the pictures here Thanks for the information

No I just have lower half one piece soft doors.They are the same shape as the hard door but appear to have no way to mount a upper soft half to them unless I need some parts.

My 89 YJ came with only the lower soft doors I looked at buying the upper soft doors but could not see anyway they fit together,is there a different upper frame to fit on soft lowers compared to the hard door lowers.

Thanks for the reply,I have a chiltons but it did not give a list of all the numbers for the YJ models. did I read right that this motor takes 6 quarts of oil when changing with a filter replacement ?

I have a 1989 YJ I was told the engine was swapped I'm sure it,s a 4.2 but I cannot find what year it is.the engine numbers on the block read 411C29. I cant find a site that shows what year this number means.Parts store said the oil filter number I use is not for that year.any place I can look...