Search results

No More Check Engine!!!!!!! FINALLY!!!!!!!!!!!!!!! The damn light is OFF!!!! And for two whole days!!! Turns out the distibutor was wore out and had too much play in it, Causing the rotor to miss the contact points! I guess thats why it was ok at full throttle,Everything tightened up!?!?!? I...

My wife just wrecked her 04 malibu.... prob not worth fixing.. and at 30 mph!!!! At least now i dont have to worry, she is safe in the ol' xj!8) 8)

Is the exhaust crushed right at the flange where the manifold meets the pipe???? Mine is the same way!!!! thats odd. I have no idea how it was possible to be crushed there but it is!! If correcting this problem helps any at all please let me know. Mine has some unresolved misfire issues that are...

My 96 did that when the O2 sen went bad. I wound up replacing both instead of trying pinpoint it to 1. My mpg's were cut in half too... don't guess you really know bout yours...I have always been told that if you tap the converter with a hammer and it sounds like it has rocks in it, that its...

www.wheelininthecounrty.com Park open just about every other weekend. Biggest ride of the year is new years day!! prob 1000 vehicles last year. Been waiting all year!!!!! Summertown, TN is prob about 1.5 hrs from Murfreesboro

Oh man i'm new here too!!! but yes this place rocks!! If you don't know it, someone here will for sure! Good luck keep us posted!

White like this one?? Yellow would def catch your attention! I like the yellow!!will need some nice shiny wheels!!

Hi Scott, I don't know about the grand, but my cherokee has a heater valve located on the passenger side firewall that is controlled by vacuum. I replaced mine for the same reason. On mine, when the heat is off, the vacuum is on, so if you disconnect it you can feel the suction. hope this leads...

Is 19lbs enough?? I have done alot of reading on fuel injectors and I found a set by Accel that are reasonably priced, but I also found that some are using 21lb. Is there that much difference?? Are there any pros/cons to using a larger size? I don't mind payin extra if its REALLY worth it...

Sorry try it now. http://www.go.jeep-xj.info/index.htm

I just wired my 96 like that, works great!!! www.GoJeep-xj.info/index.htm. He specifies a diode to keep current from back feeding to the module, which you can get from radioshack, but i just used a spdt switch, so there is no possible way you can do any harm. Read the torque converter lock...

Thanks guys for all your help. I will look for some ford injectors, and see what happens.:-) I checked out lots of sites before joining here, but Sparky was right, tons of awesome knowledge here!!!Thanks Oh and I haven't checked prices on injectors but I assume they are not cheap, esp if I...

My fuel pressure is normal according to specs. I will do some research on different injectors. This would make sense though, even with the old engine i didn't have this problem. Thanks :-)

Back once again... I talked to guy today that told me that my computer will have to be changed/modified since the engine was bored. Does anyone know if this has any truth to it or was he just feeding me some bs??? I thought the sensors do all the work and just give the info to the cpu??

It is driving me crazy!! One of my friends has a OBD-II and i have had it for about 2 weeks now. This is the only way i have cleared the codes. When the light comes on it stays til it is cleared. If you drive it normally, it runs just fine and if i'm getting on the interstate and put the petal...