Search results

1042403 Try the simple stuff first. Dissconnect the battery for about 5minutes and reconnect. See if it starts or displays done on the odo.[addsig]

1042404 This link has a brief but effective jeep break down. http://www.edmunds.com/reviews/generations/articles/46011/article.html[addsig]

1042627 I hav ethe Rusty's 3" lift with AAL's (add a leafs). Easy to install and works great. I would recommend that you get the 3" leaf packs though, I here my AAL's will eventually sag. Mine have been in for months now, and the rear is still right at 3.5". There are better lifts, but I...

1042628 I would not recommend a cheap 4" lift. At 4" the drive line angles get a little hairy, you'd need a kit that can handle these angles and not turn your jeep into a massaging chair. What size tires are you wanting to run?[addsig]

1042653 where abouts in Arizona? I spent some time in Tucson, great town. Loved the hunting, lots of open land to hunt for free on. Shorts in the winter during the day, while looking up at the snow on Mt Lemon. Loved it.[addsig]

1042682 I buddy of mine had a RE 4.5" lift with 32's and he still trimmed the fenders and put bushwackers on. He loved that setup. He just recently went to 35" tires and just ordered a long arm kit and 6" coils. If I only had the money![addsig]

1042757 The 3" lift doesn't require the LCA's because it doesn't change angle of stock LCA enough to justify buying a set of extended or dog-legged LCA,s. I did check my trac bar, it was off by a little more than 1/8 an inch. The front springs don't appear to have changed the length of my...

1043032 Could also be the TDC sensor. Here is some tech stuff on it: http://www.off-road.com/jeep/cherokee/xjtech/engine/40ltr/tdcsensor.html I've heard that you can dissconnect it and reconnect it and that should be a VERY temperary fix. It should help you narrow it down.[addsig]

1043033 What year XJ do you have? Just curious if they installed a open or closed style radiator.[addsig]

1043034 Here is brief history that covers the trim and other differences. http://www.edmunds.com/reviews/generations/articles/46011/article.html[addsig]

1043035 At what rpm is it finally shifting at? 2500, 3000?[addsig]

1043037 I don't know how mechanically inclined you are, but here a run down about the job you're talking about. It really is a easy, but time consuming job. My jeep isn't my daily driver, so I have no excuse not to do it myself. Besides, scars are cool...

1043038 Have you considered something like this: http://www.off-road.com/jeep/cherokee/xjproducts/company/linex/linex.htm When my paint starts to fade, I'm going that route. I got a rough estemate of around $800-900 to do my XJ. [addsig]

1043039 It could be the belt. I was talking to a guy about his XJ and he sadi to took a daeler belt to finally quite his down. He tried two of the AutoZone type cheap ones, they did not help.[addsig]

1043208 I don't think the price is that bad. New stuff is never cheap. Were talking about two D44's with electronic lockers and a transcase with 4to1 ratio. I've read two articles now about the performance of this jeep in moab and the rubicon, and the only problem was clearence, and that was...

1043244 Man, not to be a downer, but you should have considered a open cooling system convertion. Real easy to do, the hardest part is on the pocketbook. Have you considered a stroker motor? There are quite a few article out there about the 4.6 and 4.7 stokers. They seem like they would...

1043245 The XJ (Cherokee) body is a unibody. There are no spacers. The only thing you have are bushings on the front and back of the leafsprings, and the bushing on the front upper and lower control arms. There is also a small spacer on the spring perch up front. The other body styles TJ...

1043270 Full packs, or AAL's?[addsig]

1040571 Hey does anybody know what size spacer I will need to run a flex fan on my 93 cherokee, it has the 4.0HO and is 4wheel drive.[addsig]

1041097 I am curious to know if I can use a 87 non HO block with all of the standard equipment on the 93 I6 Hi HO engine I currently have? I may be able to get my hands on one pretty cheap, but if I can't exchange the head, intake, water pump, alt, ect, ect.... Then I don't want it. I have...