Search results

I think the biggest thing is something no one has talked about. When changing your tire size you really need to change your speedo / speed sensor to fix the input to your computer. Without fixing your vehicle runs like garbage, get crappy gas mileage and just all around tends to **** you off.

Working retail, I can tell you that the inverntory control is wierd sometimes. I have seen where an item is not removed from inventory until shipped. this can cause days worth of delays in inventory numbers. Another thing is how they ship and recieve their merchandise. If recieved in one...

I filled with straight vinegar let it sit for 1 hour. Then ran the jeep for 30 minutes at idle, just so you know, running the vehicle with straight vinegar IT REALLY SMELLS BAD when draining. Makes everything look like new.

I am pulling out the Thermostat and then flush/clean with prestone one more time, then trying the vineagar and see what happens. If it goes south on me it just means a new radiator. I dont have any heat problems just do not like dirty cooling system. just a perfectionist (my wife says anal...

I could not find anything in the area. I was told maybe a light socket. All my side markers and turn signals work, so that could not be it. What is an "IAC motor"??

Found this mass of melted wiring but do not know what it goes to. That is the throttle body at the bottom of the picture. the wiring comes out of the loom that runs to the injectors. 94 YJ with 2.5L and Auto tans.

So I flushed the radiator this past week (horrible) drained everything then back flushed. I could see that the radiator was filthy inside, so pulled the bottom hose and flushed again I could not believe the crap that came out. Put in Prestone "Cleaner" since it is supposed to be better than...

Now that I see the large can, there is no way that I will use mine for that. What is that a 40mm can? That is perfect, would hold most of the things I dont want walking away.

If youre putting the money in dont think just 3 months down the road but what you might want to do 3 yrs down the road. mudding or crawling calls for different gearing. And to throw out there, my sons jeep has the 2.5L, automatic and 488 on 31" tires 95% on-road, great speed 70MPH at 3500 RPM...

Buy it at walmart for $10 a quart and then fill one of the small bottles for fill up. Best deal ever.

94YJ 2.5L with automatic transmission. Pulled the air cleaner box and Hose to the throttle body, the Hose was caked with oil and crud. Cleaned it out, then pulled the tube from the PCV valve to the hose it was pretty filthy, so I cleaned it also along with the throttle body. Purchased new PCV...

To double check the wiring diagram, go to the dealership and have them pull your build sheet and print your wiring diagrams for your vehicle. I did this for my sons jeep and found minor differences from the haynes manual. If nothing else you will find out what specific things that fuse goes to.

I dont know A good cup holder is very important

I did the gear swap, factory to 4.88. This was because my gears were bad. The most important thing I found was to get the speedo gear corrected since the automatic transmission uses speed sensors to regulate a lot of things.

Both look good. I actually have 2 Ammo cans that have studs welded on the bottom that are powder coated. I was going to bolt the behind the seat of my truck, but I could put one in the jeep, could spin around and put cup holders on the end (like the boat idea). The other one does not look...

I have tried the cheap ones , looked at a Tuffy console yesterday, and my coffee cup or water would not fit good as it was only 1 to 1.5 inches deep where the beverage goes. Making my own would be nice since I could put a place to stash pistol. Well will have to look some more since I have no...

I am wondering if anyone has an aftermarket console in their jeep. I have a 94YJ, and the most important upgrade at this point is something to hold my coffee cup. Any suggestions would be appreciated:coffee:

Just went to the "stealership" to get a key made for my sons jeep. cost me $20 after tax. Then went to home depot and had 2 more cut from the one we had made. They all work great, worth the $20 took about 5 minutes at the parts counter, and the two free quad shot expressos at their coffee...

My son is in 1-24 INF BN up in your neck of the woods.

3rd generation military, (son is the 4th gen) US Navy 1980 to 2001 Boatwains Mate HCU-1 (Harbor Clearance unit one) Plankowner MDSU-1 (Mobile Diving Salvage Unit one) Plankowner USS Safeguard ARS-50 SIMA Pearl Harbor USS Worden CG-18 USS Carl Vinson CVN-70 USS Camden AOE-2 IMF Everett 21...