Search results

It's an adapter for 2 bbl carb. For now the 500cfm run well but I want to up for the maximum performance without change camshaft or other thinks.

Thanks for the information. I will change the shackles

Its an edelbrock 7531 and I have a Holley 500cfm with main jets size 68. Also spacer to install the holley because is a 2 bbl. Header. HEI ignition. The rest of the engine (cam, head) in stock condition.

It 33x12.5x20 I feel the jeep unbalanced and I think I miss something to add. I already have high shackles, single steering damper (maybe I need to add dual shocks). I have 1.5 spacer on chassis.

20" diameter

Hi guys. I planing to increase my carb. What is the best cfm for a 360 engine. I have my engine with edelbrock air gap and 2bbl 500cfm.

Hi guys. Any one know what I need if I going up to size 35" with 20"ring. what kind of shackles, leaf, spacer, all of those stuff.

Just return to the original fan and eliminate the electric one.

Ok I will check and let you know. Thanks.

Hi to all... I have a problem with my air horn system. When the Jeep radio is off the air horn system work perfect. But when the Jeep radio is on, there is a feedback noise and the air horn system not work. I separate the cable from the battery but that does not work. Any help please let me...

I plan to use on street and less OffRoad. You think that 500cfm 2barrel Holley can work?

Hi, I plan to improve my 360 AMC Engine. I have the stock carb & intake. If any one have recommendation for this improvement let me know. Thanks in advance, jc

Thanks

Hi to all, Does any one know how much torque need the intake bolt on a AMC 360 engine. Thanks in advance.

What chevy model & year?

Hi guys, I need to repair or replace my Automatic tilt steering column from my CJ7. I try to adjust the torx head fasteners the secure the lower tilt housing to the column but I think that the housing base are damage. I tighten them but isn't work. they adjust to the fastener but the housing...

After all...the problem was that the sliding yoke of the rear drive-shaft was not align within the shaft. I remove the sliding yoke and install again in alignment with the shaft and both yoke. Now the CJ run smoothly... Thanks...