Search results

it was mig i dont know what machine it was my buddy is the welder.i can find out from him if you want.thanx for the replies all.

only spent 70 dollars on steel and there will be alot left.probably could have done it for 40.they make my jeep look alot bigger with all that wheel well.this is somthing i wanted to do for awhile,and was kind of forced into it since my tire caught my inner well and shredded my old fender.

not done yet but they are bolted on.still have to add some more tube and build inner fender wells. :D

http://community.webshots.com/user/cj5steve =viewall&albumID=78909973[/img]

here is mine Nope, the url is dead. So the pic wont work. Sully

it turned out to be a bad ground on the blower motor.i did the blazer motor swap in the summer and since i have a glass body i put a hoze clamp around the body of the motor with a ground wire in between is there a better way to ground this. :mrgreen:

btt

i just went outside and fired up the jeep.while it was warming up i turned the heat on and cleaned off the windsheild.hopped back in and turned the headlights on and the heater almost shut off like i turned it on low,the headlights did not come on neither did my side marker lights the dash lit...

i need help and this seems like a good place to ask.i cant get the brakes on my slider car to bleed.it is a 87 plymouth caravel(dont laugh).the front passenger side will not bleed.so far i changed the caliper the rubber hose the metal line and the prop valve.i bleed the master cylinder and still...

Drop Down Step i have a 78 cj5 with a 360,d30,amc20,t150,d20 t-case,and 36"swampers.the rears are 3.55 gears and open diffs front and rear.i run alot of mud but also like to run on the trails.my question is would you run lower gears or look for a t-18 transmission.i have been looking for a...

i hooked up my test light to a good ground and to the side of the motor my test light lit up.

help.i cant get my wipers to work.i put on a new wiper motor,changed the switch and still they dont work.the linkage is not bound up.the motor worked when i hooked it directly to the battery.when i test for power at the motor with it hooked up all three wires have power when the key is on...

i had to log in for this one.my jeep leaks air very badly and last winter i ran about 3 months without heat at all.i broke the heater core in november while changing my motor.when it got warm enough for me to work on it i put in new heater core a chevy blazer heater motor.this year i am going...

hey all.sorry been gone awhile.anyway the oba turned out great!the tank would not fit between the transmission and the frame so i put it above the rear axle.there is plenty of room there even when flexed out.i just bought a impact gun today and it runs it with no problem.it will blow up a...

i run a 4"skyjacker suspension lift a 2"body lift and a 1"shackle lift with 36"swampers.after all that i had to get diffrent backspacing on my wheels to get it to not rub the springs(dont remember what the b.s. is)but all is well and i can turn on a dime and flex pretty good without rubbing at...

nice

lol!

you will need a steering wheel puller. wish i could tell you more but it is pretty straight forward not much to it.good luck!

got my oa hooked up on the motor ordered my tank and all my fittings from kilby should be here tomorrow or the next day cant wait!my air tank is on back order.can i fit this tank between my frame and my transmission.on a 78 cj5 with a t-150 and a 20 t-case it is 6"x23"if i cant oh well. can i...