Search results

I bought this kit. The documentation is very thorough and this would probably be a good way to go if you dont have much experience with working on your engine, if you've swapped out a carb before, know what you're doing, and know which vacuum hoses go where, then you might be better off buying...

Yeah, I believe an 89 XJ rear D44 is a direct bolt-in.

It's a pretty sweet setup. I've got mine set to about 12 or so btdc. I'm running it with the MC 2100 instead of the weber, and havent had any issues with pinging. Did you cap off the vacuum advance when you were setting the timing? I noticed a difference when i hooked the vacuum advance up after...

RE: Re: Laughter.... the color of life uh, doesnt applying a thin coat of crisco accomplish the same thing?

RE: workin what's the install like for the mechanical conversion? does it simply go from the transfer case to the front diff? where can I get one?

RE: Sunday Humor I just installed a DUI HEI on my 88 4.2liter, Performance Distributors recommends AutoLite Double Platinum gapped to .50-.55. They work very well.

Who says you can't pimp a 'wheeler? If what you're trying to do is bypass the starter switch in then all you have to do is run constant power through one of the switches to the small wire on the starter solinoid. The ignition could be bypassed the same way, but you're going to want to make sure...

RE: New To The Jeep Thing Saw this in Four Wheeler... http://www.dmhperformance.com/ecutout.htm Any thoughts? I suppose you could install it before the cat and then run a straight pipe so that you could get a little backpressure. But would it be worth the $$$? _____________________ 88 YJ...

Did they ask you to sign waivers promising not to file suit for negligence? What kind of disclaimers did they provide with their installation? It seems to me that if they're conducting business in this manner they're gonna get someone killed. I wouldn't be surprised if most 4x4 shops make you...

I've read a couple of the write-ups, I'm just wondering if I need to track down a cherokee header or a 91-95 yj header...

RE: BABY! Gary, if I swap in a 4.0L HO cast head i would need a header for a 4.0, correct? I could still use the intake manifold from the 4.2, I think. So this would give me more options for which header to use. This means I would need to purchase a header for a 91-95 YJ? But the HO head is...

Junkpile, I got the 351 cfm carb and my ignition is optimized to the larger carb. How much trouble is putting a header in? Do I have to do much beyond pulling off the intake manifold and just replacing the exhaust manifold? I dont weld, so if that's required I would have to pay for labor.

I ordered a DUI HEI, livewires, and a 2100 yesterday. Can't wait to do the install. Regarding the 4.0 head, I just saw that Hesco came out with a new solid aluminum head for the 4.2/4.0, not sure how much they want but might be worth looking into: http://www.hescosc.com/newproducts.html Gary...

RE: engine rebuild questions @ 220k - 4.0 HO (94 XJ) you should be able to determine which transfer case it has pretty easily: just crawl under the jeep and look at the metal tag riveted to the back of the case. It will say "New Process - Syracuse, NY" and in the center it will be stamped with...

My YJ's registration says that it's an 87. However, it does have an NP231, the imported starter, the jeep badge on the glovebox and everything else points to it being an 88. The starter in the 88-90 is smaller than the starter from the 87. You should also be able to tell from the badge on the...

Re: RE: What President Bush Hopefully not too many people get pissed about another post from me. Ok, so I'm having a little trouble getting my stock 88yj started. Engine turns over when starter is engaged, I am getting spark, I have plenty of fuel, and fuel is flowing to the carb. For the...

Anyone used one of those bolt-on trusses w/ rear diff cover? I'm kinda in the same boat, as I want to put 35"s on and there's already a locker in my Dana 35c, I figure I'll just put new shafts on when the stock ones break.

RE: I know it is personal preference but... Yeah, that's pretty much what every Carter carb is like. You're probably going to want to get a Weber 32/36 or 38 or a Motorcraft 2100 when you get the money. Sounds like someone already took out all the stock emissions equipment a la the "Nutter...

RE: Future Build Question. Well, could get a DUI distributor/ignition for $360, anyone have any experience with these? Oh, and how bad is the Weber about angles? I wont be exposed to too many extreme angles, maybe some dunes here and there. Mostly just trails w lots of mud.

Future Build Question. Well, the new carb will take care of the intake (it comes with a K&N type filter), and I have installed a less restrictive muffler, plus I've heard nothing but good things about the Jacobs ignitions. Besides, what's a port and polish and new cam gonna set me back?