2006 Intake Manifold

[2006Rubicon]

Hi, I'm new today so if I screw up or ask stupid questions sorry. I am rebuilding a 2006 4.0l Rubicon and have run into a snag with the intake manifold. It has a corner chipped off of it where the bolt goes through closest to the front exposing the intake port rendering it useless. I am trying to find a 2006 intake new and apparently they dont make them. So now onto used ones. I have heard that 1997-2004 all can be swapped but 2005-2006 are different. Can anyone confirm/deny this or point me in the right direction?

thanks in advance.

 

[JPNinPA]

Yes 2004-2006 are different. However i need to look if they are interchangeable. The difference was to improve flow.


Sent from my iPhone using Jeepz.com mobile app

 

[JPNinPA]

I believe they are interchangeable as many earlier modles swapped for more flow and butt dyno improvements


Sent from my iPhone using Jeepz.com mobile app

 

[2006Rubicon]

So thats great then anything from 1997- 2006 will interchange and only change is airflow is what I understood. Do you know if the airflow difference to install a 2003 on a 2006 would be significant enough to cause performance issues or is this just a change for emissions? For example are my O2 sensors going to be creating problems if the amount of airflow is altered significantly?

 

[JPNinPA]

Emissions. IDK most go from old to new.
You know Dorman makes a $175 replacement. Guaranteed not warped.


Sent from my iPhone using Jeepz.com mobile app

 

[2006Rubicon]

Didnt know that. Thank you for the information.

 

[JPNinPA]

Ordre of tightening is important. Good gasket maybe new bolts


Sent from my iPhone using Jeepz.com mobile app