Hey guys, I'm looking for some help, let me give you a quick break down of where I'm at.
A few months ago my AC started acting weird. Cold on drivers side and not on passenger side but air was being pushed out the vents. I was going to just trouble shoot that but recently the entire system stopped working. No air on any of the settings. I really want to get the blower working again before I take it in for an AC fix (I have already tried charging it and the gauge said it was full and didn't need a charge).
I pulled the blower motor and tested it by hot wiring to the battery. Motor works fine. Then I pulled the blower motor resistor and tested with a meter across all the points and it tested fine. All terminals looked good, no blown wires or rusty connections. I pulled the dash panel off and checked the connections to the heater control unit which all looked fine. It looks like I may need to replace that control panel (Dorman 599-147). Before making that purchase I'm wanting to know if there is something in the chain I'm overlooking? Something else I could test?
I checked all the fuses and they all look fine. Please help :shock:
A few months ago my AC started acting weird. Cold on drivers side and not on passenger side but air was being pushed out the vents. I was going to just trouble shoot that but recently the entire system stopped working. No air on any of the settings. I really want to get the blower working again before I take it in for an AC fix (I have already tried charging it and the gauge said it was full and didn't need a charge).
I pulled the blower motor and tested it by hot wiring to the battery. Motor works fine. Then I pulled the blower motor resistor and tested with a meter across all the points and it tested fine. All terminals looked good, no blown wires or rusty connections. I pulled the dash panel off and checked the connections to the heater control unit which all looked fine. It looks like I may need to replace that control panel (Dorman 599-147). Before making that purchase I'm wanting to know if there is something in the chain I'm overlooking? Something else I could test?
I checked all the fuses and they all look fine. Please help :shock: