I just finished putting all the heater system back in my '90 wrangler. The previous owner (well call the cobbler) stripped it ALL out and tossed it! I found a donor jeep and got everything I needed and put it all together over the last two nights (boy the door jambs sure cut into the ribs and back while working under the dash!). The only thing I need help w/ is finding were to get the hot wire for the blower from (the donor jeep is now gone so I cant look). I know its supposed to be orange w/ a white tracer and it connects under the battery tray. Well during the sbc engine swap most of the stock underhood wiring was "fixed" by the cobbler.
Can anyone tell me were to pick up this power source, or better yet show me w/ a pic or schematic?
I do have power at the the fan speed switch and the resistor in the plenum.
As a bonus, the blower was already swapped out to the bigger GM unit
Thanks, jeff
Can anyone tell me were to pick up this power source, or better yet show me w/ a pic or schematic?
I do have power at the the fan speed switch and the resistor in the plenum.
As a bonus, the blower was already swapped out to the bigger GM unit
Thanks, jeff
