Throw out bearing and clutch replacement

[Liutas]

How much should I be paying to have my clutch release bearing and (possibly) clutch replaced?

EDIT: Almost forgot, '06 wrangler rubicon, 4.0, 6 spd.

Thanks

 

[BaconYJ]

How many miles do you have on it?? They usually last 80k+ miles.

Bacon

 

[Liutas]

How many miles do you have on it?? They usually last 80k+ miles.

Bacon

A little over 50k, but it's definitely going, sounds like crap when I push the pedal after it's warmed up. Doesn't do it when it's cold.

 

[gearheadmb]

I just checked Mitchell and the job flat rates out at 4.7 hours. I would definitely install an entire clutch kit and not just the bearing. Check around on prices for the clutch kit, sometimes you can get them from the chrysler dealership for around the same price as aftermarket but not always. Make sure you get a good quality kit either way. If you don't get an original napa sells a pretty good clutch.

 

[JJs 88 Wrangler]

If you are going to have throw out bearing replaced, do yourself a favor and have the clutch changed too.