Search results

I would think if you keep all smog stuff on engine and put good exhaust on it should be ok. but that is alot of work for might be good luck

don't have to worry Im in canada and it was already on the road don't need to get emissions to renew plates. And after a certain year here no worries. Damn jeep is 24 years old now.

first small block of course. I use an 86 350 because i used the clutch from the s10. The bolt pattern changed in 86 on the crankshaft. If you get a transmission from an s10 with 4.3 you can use that flywheel on 86 an newer small blocks. I got motor mount that came from advanced adaptars(Traded...

if you are going to do the swap i can give u a list of the stuff i used.

I was lucky I traded old axles for the motor mounts. Had to fab up transmission mount and shifter for transfer case. Of course drive shafts. where you thinking of going auto or manual transmission.

what gears do you have try changing those 350 should be a ton of power.

did it for under a grand, helps that brother n law has junk yard. Also traded things to get it done. any questions I would be glad to help fellow jeeper.

can't see it being that easy. But wouldn't be hard I put 350 in my yj with a 5spd from an s10

measure what you take out and add 1 liter for the filter. Should be about 5 liters. or goggle it.

i would go mechanical. I did a small block swap in my yj went through two electric pumps. not sure if it was my wrong doing but really PO. But that is my 2cents good luck

Just doing some research before I do it. All comments are welcome. Did the same when I did small block swap. Was told couldn't do it for under 10,000. I did it for 800. never happier I can really throw mud now. thanx for all the replies. still thinking about it

any holes in the fuel lines? fuel pressure regulater? plugged filter? I had an 88 aswell the float on the sending unit shorted out causing pump to quit. check that aswell. Hope you get it fixed

yes or no to spring over. Jeep allready has 3in lift. should i do it

hey new to site. But just did this in my yj. Did it for under 500, I used s10 transmission transfercase (nv3500 241) I was lucky s10 came with new clutch. I made my own shifter for t-case and transmission And didn't need sye. slave cylinder used from s10. Making some of the things needed is have...