Search results

well I was just wondering, I have the motor sitting there and if it would be easy I was going to put it in. Will it bolt up to the ax5 transmission without any mods? I know I would have to change the flexplate out for a flywheel.

So I guess it is not just a bolt in and go...

I have a 4.0 that came out of a '91 XJ that was wrecked. It has an automatic transmission also. I want to put it in my '94 YJ that has a 2.5 in it. Is this a possible swap and if so what will I need to do for the change over?

Is there any way to check the amp output(not voltage) on an alternator with a multimeter?

What is the cable connected to on the actuator?

OK, I answered my questions through the search. I want to know what kind of cable you are using on the homemade posi-lok set ups?

I went out wheelin yesterday with a couple friends and found out that my front wheels were not turning. It's a '94 YJ. I know it has some sort of vacuum switch to lock the front end. Is there an easy fix for this problem?

Is $250 a good price for a dana 70 w/4.10's out of a dodge truck?

The fan on my cj is just a generic single speed fan that was given to me, so I was wondering if I need to stay smart and go with a big relay or a small 40A? Also what amperage fuse would be the best for the application(20A-30A)?

Has anyone changed out a pulley on their power steering pump? I am getting my '77 cj w/a 304 put together and found out that the pulley is bent. It wobbles so bad that the belts will not stay on. I need to change it out but can't figure it out.

Thanks for the diagram. On the adjustable temp. switch, Is that one that you can get from Jegs or Summit? And I am putting a single speed fan on my CJ, do I just eliminate one of the relays and if so what amperage relay do I use?

I will be installing a Taurus electric fan on my '94yj and another on my '77cj, I was wondering if I should use it as a pusher(outside the radiator) or puller(behind the radiator)? Also, will a cj radiator work on the yj?

I was wondering if a '78 cj power steering gear box will work on a '94 yj?

How can I tell if I have one piece axles or stock axles in a dana 20?

I have a '94 YJ with a 4 banger. It started running hot with me the other day sitting in traffic. The outside temp. was around 80. It was full of coolant so that wasn't the problem. I have noticed there were some corrosion build up inside. I know it can be cleaned out but I would like to install...

I have a '77 CJ7 with a 304 I'm building. I bought it when it was in pieces and trying to put it back together. I don't know much about the mods to the engine except it has an edelbrock intake and a carter 4 barrel carb. I don't know if it has any internal mods or not. I recently got the motor...

I'm going to try to check that today, hope it works.

I have a '77 cj7 that i'm putting together. Bought a rolling chassis for cheap$$$. I had to do some welding to get the frame up to par. Now I'm ready to put on the tub, What size are the bolts for the body mounts?

My '94 YJ is still not running. I've replaced the cps, tps, all relays, and checked all fuses. Nothing, no voltage to the coil. I don't know if it's the ecm or not. I do not have any turn signals and the wipers don't work either, but the flashers do work. Someone told me that it could be the...

I found an '84 amc 258 for a very reasonable price, Has anyone put one of these in a YJ? I have a 2.5 in it now and need more power. It also has an AX-5 transmission. Will that transmission hold up to the 258 and will it bolt up together? I don't want to have to change much out right now.