Search results

RE: Re: RE: speakers You can also fab what is called a bam bar to stop axle wrap. http://www.jeepaholics.com/tech/bambar/

I just put a MC2100 carb on and when I took the POS carter off it had only 1 gasket.

I just finished installing a MC2100 on my YJ. I screwed an adapter into the carb so I could use the stock fuel filter. I also removed all the emmision vacuum lines and only have the advance to the dist. and the PCV line going to the carb. I added a manual choke because I couldn't get the elec...

Daystar/Prothane 1" urethane bushing lift question I just finished installing a MC2100. It cost me about $100, but I ghot the carb for free. I had trouble getting the float right but everything is good now. Another plus with the MC is you can remove abunch of the emission stuff...

I just finished installing a motorcraft 2100 carb on my rig. When I started it up, it runs rough and gas comes out of the two bowl vent tubes (at least I think that's what they are) into the air cleaner. Do I need to adjust the float or did I do something wrong when I rebuilt the carb? I got it...

I'm replacing my radiator and have a few questions: 1) If I put a thicker radiator in for better cooling will I have fan clearance problems? 2) I'm going to do a home 1" body lift soon. I know that the fan shroud will hit the fan when the body is raised, so is it possible to cut the bottom of...

RE: O.T. -- Belt Sander Drag Racing I'm with green. The only shop my jeep has been in is my garage. It's hard to get it to a mechanic if it breaks in BFE. Kevin

Lockers If you know the bolt size, drill it out to just under the min. thd. dia. and pick the threads out. Or you can drill it oversize and put a helicoil in. I like using all the bolt locations. Hope this helps.

I just rebuilt a mc2150 that I got for free and I'm ready to put it on. My question is, does anybody that has done this mod have a good pic of the throttle linkage plate that you need to make on the carb? I'm having a brain lock and can't see how to put it all together. Thanks.

Glad to see someone is up there in years with me (Tug). I'm also 45. Till June at least.

Last week my 90 YJ wouldn't idle. Checked the board and got some great suggestions. I followed the post on cleaning out the venturi cluster and it now idles. I also ordered a Juicebox and installed it today along with doing the nutter bypass. The old girl has never run so good. As soon as I find...

1059216 I'm new but I've done some research on the clear diff. covers. They are made of a very strong plastic that is practicly bullet proof. The reason they are clear is so that if you do a lot of mud and water 4 wheeling it is easy to see if any water has reached the diffs since the water...

1060330 I had my cat removed and a flowmaster installed. I noticed a little more power on the bottom end and about 1 mpg better. It is loader than a stock muffler but Tug got the sound description right. Besides, don't you want people to hear you coming so they'll look? :-) [addsig]

1062027 Jay89, I had my cat removed (nuetered) and a flowmaster installed. Whan I did that I removed the check valves and tubing that went to the exhaust system and pluged everthing on the stock airfilter like Jeepngeo did. Everthing is running great with no problems. [addsig]

1059012 Found this site while looking for parts. This is a great site and I've already learned alot. I got a 90' YJ two weeks ago and have already started building it into what I want. I took the cat off and added a flowmaster muffler, replaced the soft top, did a total rear brake rebuild, new...

1059190 I replaced my soft top and upper door halves and now the door doesn't close right. It seems to me that the door is sagging, if I lift it up near the latch it closes fine. My question is: do I need to replace the door hinges or is there some kind of adjustment I can make to it? Thanks...

1059731 Yesterday on my drive home, there were 30 mph winds gusty to 50 mph. My wrangler was a two handed steering job and the top halves of my doors ( I have a soft top ) would blow out about an inch or two. Is this a jeep thing that I need to get used too, or is there something I do? :-O...