Search results

I came; I saw; I posted....

well now, here's my post; I haven't been here in a while, but sign me up...

I put a Superior one piece in my CJ a few years back. It was well worth the 300 bucks, and it wasn't too difficult to install. Just remember to have the bering retainer rings pressed on at a shop if you don't have the press at home. I ruined two sets of berings and rings trying to be cheap...

RE: clocking dana 300 I did that several years ago with my 78 CJ5 - it was sure a chore. I just used a bunch of primer and spray paint. So far, it's been holding up fine. I had a few rust spots around some seams, so I used POR-15. That stuff is still rock hard. I used that dupli-color pickup...

My female side won't talk to me any more She said I had wandering hands.... :shock: Your Brain is 26.67% Female, 73.33% Male You have a total boy brain Logical and detailed, you tend to look at the facts And while your emotions do sway you sometimes... You never like to get feelings too...

gunner here - "the baboon chatters while the wise man listens" Chun from Remo Williams

I have a 78 CJ with a two barrel - Just like Far Right suggested, I got it at autozone. It was a bit steep -about 24 bucks, but they still should have one. Just make sure you copy the numbers down that should be on a tag somewhere on the carb. - good luck

Taking it down to metal would be a crap-load of work - when you go to gently skuff the surface, be careful not to gouge the old paint. I got too excited with the angle grinder and a wire brush were there was good, old paint; now it shows in the new paint. Maybe there is some chemical that...

my youngest son had an imagenary friend who talked to him a lot - I just picked it up.

do it; you won't be happy until you do - I did mine in desert sand tan, and I could not get it off my mind untill it was done; in the end, I was happy. It was not the best (Krylon camo), but I was happy. Do it; don't look back - It's your Jeep; do it - - -

I've run the stock 2150 for over 15 years. I've rebuilt a few times - it was fairly easy, but the rebuild kits cost over 20 bucks. Over all it's been fine. Awhile back, I got pissed and ripped off all the auto choke crap and just ran a cable to the choke plate. Over-all it works and is fairly...

NEW Goodyear 225/75R/15's (5 of them) I vasilated over the same thing for a long time, and then finally went with steel. Over all, it's just more versitle - and if you get a dent you can always pull or pound it out or you can weld it. The only problem is the stinkin rust that developes...

That's a good idea, thanks!

Yea, you're probably right, but I'm one seriously cheap SOB. Since I spent the $299 on the Superior one-piece axles a few years back, I should get some kind of locker and do it right. My brother has a lock-right in his M715; and it works well. I would still rather go with a spool: fewer parts...

Hey, has anyone found a spool for the AMC 20 or have you welded down the spider gears. I checked with Randy's R&P a while back, they said they were working on a spool, but were not satisfied yet. There was an aritcle in 4Wheel a few years ago, but I never found the follow-up on it. I had a...

For anyone who loves his or her Jeep and actually uses it, Bush would be the logical choice. Democrats, in general, have been successful in passing and enforcing legislation that has limited if not completely banned off road access in many areas, and they are not done. A large part of their...

They sued HardcoreJeep, mainly, because they had and area for the members called "Jeepbabes". It had naked girls with, on, and around Jeeps - it was sweet. The baisics of the law suit were that the site was using the Jeep name and logo for profit without DC's permission. The guy that ran the...

Torx bolts suck - the suck hard. I have made it a point to replace all torx bolts with hex head. Ok, they stick out a little bit, but it's well worth it. For the windshield and door hinges, I just drilled out the torx fitting in the center and then cut off the bolt side. It made a cone shaped...

This is a fairly civil board compared to some - we all seem to support the same goal: Jeeps and the rights to continue off roading. I do, however, miss HardcoreJeep.com. DC drove it off the web a few years ago. It was fairly small, but there was a definate "brotherhood" of sorts - all aimed...

here's a link ( I think the link will work) to a discussion on the same topic. It might help... http://www.frugalsquirrels.com/ubb/ultimatebb.php?ubb=get_topic;f=38;t=000439