98 cherokee zj no start conditions

Mikentina

New member
I was driving one day to oic the wife up at work when jeepie decided to act up ......she started to spit and spudder than she backfired amd shut off all happend within 50 yards....so i tried to fire her back up and she said f*** you not today....so i bought parts.....lol i know what a idiot.....parts list....crankshaft position sensor camshaft position sensor distrubator cap and rotor plugs and wires and a ignition coil o plus a fuel pump and filter and she still wont start also my scanner told me this today pics below
 

Attachments

  • 20200425_134251.jpg
    20200425_134251.jpg
    1.5 MB · Views: 132
  • 20200425_134307.jpg
    20200425_134307.jpg
    1.5 MB · Views: 147
  • 20200425_134317.jpg
    20200425_134317.jpg
    1.5 MB · Views: 138
  • 20200425_154917.jpg
    20200425_154917.jpg
    1.2 MB · Views: 128
  • 20200425_155013.jpg
    20200425_155013.jpg
    1.1 MB · Views: 121

For some reason your pics didn’t load.




Never look down on anyone unless you are helping them up - Jesse Jackson
 

I can see them.

They show up as broken icons in the iPhone app.

But I can see them via PC web. Jeeps.com

Never look down on anyone unless you are helping them up - Jesse Jackson
 
Last edited:
Ok guys so i did reset the pcm and changed thise parts due to a no start condition and at this time she still dont start
 

Are you getting any codes this time around?
 
Check fuel pressure key on. Check spark. By not start you mean the engine turns but it doesn’t catch.

Does it even sputter?



Never look down on anyone unless you are helping them up - Jesse Jackson
 
Ok I realize I didn’t ask. The sensors you replaced. Were they OEM?
Aftermarket CPS and CKPs are often bad out of the box. One big issue is the CKP not having the paper gasket. Without the gasket the sensor gets inserted too far, The result is the flywheel killing it on the first crank of the engine.


Never look down on anyone unless you are helping them up - Jesse Jackson
 
Back
Top