as for application tips - COMPLETELY GUT YOUR INTERIOR (seats, console, shifter boot, unbolt pedals that bolt to floor etc...) then take the instructions and multiply by 3 at least - clean everything with TSP (trisodiumphosphate), dry, clean again, dry, clean again - then get with the scotchbrite pads (recruit friends to help save your arms and hands) and do 3 times as much prep as you "think" will work - DO NOT NEGLECT ANY SPOTS!!!! (i did neglect a few spots thinking it'd be "ok" and thats where my peeling happened) - and wipe off with the recommended solvent (very important for compatability) when everything is nice and dull and clean, tape off carefully, fill all bolt holes with rolled up tape (sticky side out) and start the application - the first coat will look like a complete waste of time - dont get discouraged - the second coat is the "money" coat - do the project you'll love the result! (oh... one more thing - Herculiner does have a shelf life and HATES heat when stored - i got to go buy a second kit b/c of that!) g'luck and welcome to Jeepz!
oh yea - buy extra scotch brite pads, gloves, paint brushes and make sure you wear long sleeves, throwaway clothes - and KEEP IT OFF YOUR SKIN!!! this stuff bonds with EVERYTHING (clothes, skin, floors, drills, screwdrivers, etc... ) !!! trust me.... i learned the hard way!!!