Carb swap update.....

[JTR0569]

Recently bought an 89' Wrangler with a straight 6 and replaced the stock car (shot beyond repair) with an Edlebrock 500cfm. While swapping I dropped the tank to clean since it had been sitting for a while. Since I had the tank out I was running the Jeep from a hose to a fuel can off of the mechanical fuel pump on the block. Everything was going well until I reconnected everything to the fuel tank. Now I am not getting any fuel at all. The previous owner had everything apart under the hood so I don't know if I am missing an electrical connection to the tank or if there is some sort of vacumm line I am missing. Also I think that an aftermarket fuel filter was added up by the carb. There are two lines coming off the out side-one to the carb and the other back to the tank.

PLEASE HELP I AM STUMPED!!!!!!!!!!:x

 

[89 jeep yj]

I wonder if the pick-up line in the tank is clogged? Maybe try to blow the line out from the fuel pump to the tank.

 

[SteelHeadz]

Are you sure you didn't accidentaly swap the return to the supply fuel line?

 

[jackrgdy]

If you blow the line out, take off your gas cap first. the tank will build up pressure and squirt you good. yes i took a gas bath once.