need help with suspension

[blu rubi]

i bought a 2003 rubicon and it had a 1 inch sag in the front passenger corner, i figured it to be a bad spring. i had a rc 3 1/4" lift installed and it still has the same 1 inch drop after new springs and shocks. any ideas on what to do now ? really would like it to sit level.

 

[jeepnkansas]

are you certain the frame hasnt been sprung or tweaked?

 

[JPNinPA]

Check your body mounts. Also measure from side to side from ground to frame and ground to body. This shoudl tell you if it is suspension or body.

 

[blu rubi]

I dont know if it has been tweaked or not. Is there a certian way to find out or just go to a body shop ?

are you certain the frame hasnt been sprung or tweaked?

 

[JPNinPA]

So, what are the measurements ground to frame on DS and PS? How about the ground to body measurements?

 

[blu rubi]

I'll have to check measurements. This seems to be a common issue on many other forums. Thanks for everyones input.

 

[jeepnkansas]

if you can get your hands on a jeep body manual,(almost as likely to find a gold nugget) it will show the factory measuring points and what they should be down to the millimeter. otherwise if nothing else gives you the answer you run down to your local body shop and ask them how much to throw your rig on the frame rack and check it.