Need info on front sway bar links

[wrangleramp88]

Dose any know of a real reliable front sway bar links manufacture i just put to new ones on a few months ago and the drivers side is broke already. I used TRW when i replaced them and i was thinking of using Moog this time . It has a 2" lift on it to. Any advise on this would be helpful thanks

 

[SteelHeadz]

I would pick Moog over any other replacement steering and suspension components other that the OEM parts. i have found Moog to be Reliable and dependable. However, it seems odd that the link would break in a couple of months. where you wheeli'n the Jeep when it broke?, if so, i would suggest the Swaybar Disco's rather than the one piece factory style links.

 

[wrangleramp88]

I did go wheeling but noticed it before i went just was a little more noticeable after. What are sway bar discos?

 

[Levinoss]

I did go wheeling but noticed it before i went just was a little more noticeable after. What are sway bar discos?

Stay bar disconnects, disconnect your sway bar so you can get more travel or flex while off road.

I made my own for my jeeps stock height. Make sure you make a few because they will ware out fairly fast driving on the highway.

Jeep Homemade Swaybar Disconnects

Anything over 2" of lift you should just go ahead and buy a real set.

 

[wrangleramp88]

Stay bar disconnects, disconnect your sway bar so you can get more travel or flex while off road.

I made my own for my jeeps stock height. Make sure you make a few because they will ware out fairly fast driving on the highway.

Jeep Homemade Swaybar Disconnects

Anything over 2" of lift you should just go ahead and buy a real set.

I just found these not 15 minutes ago when researching sway bar links I'm pretty sure I'm going to get these. I can make this a quick disconnect by drilling the lower bolt and putting a pin in it if i want or using the clevis pin idea.

4th item down
Anti-Sway Bar Links| ZONE Offroad Products