Starter change

[Ronda49]

Change the starter and not starting

 

[Ronda49]

On a jeep 2003 liberty

 

[k-2]

Which eng? automatic or manual?
why did you change starter?
Maybe the starter was not the issue.

 

[Ronda49]

Which eng? automatic or manual?
why did you change starter?
Maybe the starter was not the issue.

Automatic, burn out, then what's the problem

 

[k-2]

burn out - ?

when you turn key - any clicking - dash lights -

Anyway this diagram will make it easy - unless you have a remote starter.

 

[k-2]

this may be easier to understand

 

[Ronda49]

this may be easier to understand

The Lights come on, and still not starting and not clicking

 

[k-2]

the second diagram is easier -
fuses good?
does relay click when key moved to start?
Try moving shifter - N - to start.
Remote starter yes or no ?
CEL is light on?

A test light and diagram auto repair 101.

 

[dzimbric]

Make sure your battery connections are clean and tight. A loose connection will let your lights and radio play but won't pass enough current to crank the starter.

 

[dzimbric]

A simple check is to short the solenoid control wire to the power wire. It bypasses the ignition circuit, if your starter is good it will crank.