Recent content by vacUUm

Traditional bolt heads that you can get a good bite on can be attacked by the methods that already been listed. A great idea for the naughty hex heads or similar insert wrench heads is: tack weld a large nut (size of nut determined by what would work best in that situation) onto the head of the...

Tugger? maybe you could go to autozone.com. you can order on line. Mine would be $35. Don't worry about a few days. You're water pump is definitly shot with that little leak showing. They rarely just fall apart and strand you but don't wait too long. Don't forget to top off the radiator...

I took everything off of the floor of my yj, preped the metal and shot brown primer on all of the holes I didn't want sprayed shut so the installer would know. Put the drivers seat back in with 2 bolts and drove it to the Rhino liner shop. They did it for $300 with a lifetime guarantee. I got...

Usually when a water pump is going out there is a little leakage from a drainage hole on the bottom of the pump in a direct line with the pump shaft. This indicates a bad internal seal. Unless you have a very hot runnin li'l monster, a stock replacement pump from any well known car parts place...

I should add that the pivot ball that I'm referring to is the one on the bottom of the stick shift.

Soft top Hardware I've been driving for a week on a newly rebuilt (by a buddy) ax-5 transmission with no problems. Then, suddenly, when shifting to Reverse, I get locked out of all the gears except 5th and reverse. After pulling the shifter tower out I can see that the reverse lockout lever...