Search results

Can anyone tell me why my oil pressure gauge max's out when i turn the key on???? Is it my oil sending unit? If it is, where is my oil sending unit, should i just run a direct line to a new pressure gauge????? Please help this bothers me. It keeps me wondering if im gonna blow up!!!!! :shock:

I took your advice and my jeep runs on all six cylinders. I changed plugs from a different cylinder and you was right i had a bad plug.....The weird thing is i just bought those plugs just a few weeks ago....Thats why I thought it wasnt that. I will probably go with the Motor Craft carb....I...

Or do u think this I need to update my coil ????? A shot in the dark!!!

Sorry i forgot to say that I pulled the valve cover off and and grounded the coil and cranked over the engine.....the valve train was all even and seem to be in good working order...The reason i started pulling plug wires is because i would run the engine for a while and pull the plugs and check...

88 wrangler 6 cyl 258 weber carb auto......The jeep runs rough in idle in park and gets worse in drive......It lacks power but no engine noise.....I have changed plugs, wires. dist cap, fuel filter, air filter.....Ive adjusted on the carb everyway possible.....I have advanced the timing...

Painting TJ Flares??? If i use the motorcraft do I use the original vacuum setup? I live in a state that does not require emissions(smog) testing? The reason i ask is because i downloaded a vacuum schematic for a 258 and I dont have several of the components that were listed on the...

Thanxs everybody!!!! I think im, gonna go with the 33's and 4 inch lift....Even if i have to put the stock tires on it to put it in the garage!!!!

I have an 88 wrangler. My garag is 82 inches...

New front winch bumper. I bought an 88 wrangler with a 32/36 weber carb on it. I have tuned on it for a wile. I changed the plugs and the wires. I made sure the timing was correct. I have adjusted the tuning on the carb itself. I dont know what else to do. could u please help me . I'm...

I would like to put 33's and a 4 inch lift. I would like to know how tall my jeep will be from the ground to the top????? I f anyone can tell me please me know. The reason I would like to know is to see if it will fit in my garage.... :?

I was wondering if I put a 4inch lift with 33 inch tires how tall would my jeep be? Is there any thing special that I need to do. Steering? brake lines? Transfer case? Etc.... I would appreciate the help

I was tuning on my carb today and i took a small screwdriver and pushed down on the float as the jeep was running and it seems to run better when I do this. Does this mean that the float is set too high? Or does this mean something else????

I checked all of my vacuum lines.....I was thinking that the jetting might be wrong...float assembly not quite right?????what was you saying about a thread on this board about adjusting it better??????

I Have an 88 wrangler with a 32/36 weber carb.....It will not idle....i thought it was in the timing, the plugs, wires, distributor, etc...I believe it is in the carb....the fast idle is ok....it seems to idle in park ok but not great.......it is when i put it into drive....it bogs down to low...