HYD. CLUTCH BLEEDS DOWN

[phouse]

RE: Rusty

I HAVE A 93 WRANGLER W/ 4.0 & 5 SPD. EVERY 2 WEEKS I HAVE TO BLEED MY CLUTCH M/C SO IT WILL WORKS PROPERLY. I REPLACED THE MASTER CYLINDER, BUT I HAVE THE SAME PROBLEM. THE FLUID IN THE RES. SEEMS THE SAME LEVEL AND I DON'T SEE ANY LEAKS. WHAT SHOULD I DO?

 

[Bounty__Hunter]

CJ Bumpsteer problem

Welcome to Jeepz. Sounds like it's getting air in there somehow, maybe a bad hydraulic clutch slave?

 

[laneiac]

RE: Tire size for BDS lift.

I would think clutch slave. I do believe it was internal on the 93's....

 

[graewulf]

RE: CJ Bumpsteer problem

I agree.. check the slave. Also make sure the lines are not leaking and the fittings are all tight.

 

[phouse]

thanks!!!

 

[Snitty]

if it is a bad slave.. you're in for some work. if you have the means, you might want to convert to external

 

[LVRockCrawler]

RE: safari tops!

i HATE that donut slave/throwout combo... real convenient when it goes out... sorry.. had to vent...