What did you do to your Jeep today?

[homeboundcat]

Installed voltage regulator because factory computer pooped out.

 

[homeboundcat]

Finished dash and put splash cover on radio

 

[YJ-87]

Refurbishing the body, rear breaks, getting ready for paint, tune up.....

 

[YJ-87]

<img src="http://www.jeepz.com/forum/attachment.php?attachmentid=16672"/>

Refurbishing the body, rear breaks, getting ready for paint, tune up.....

 

[wwch99tj]

Enjoyed 80° open air

Sent from my Samsung Galaxy S3 using Jeepz

 

[69jeepcj]

finally got around to straightening my front frame horns on my jeep. They were bent about an 1 1/2" to 2" to the drivers side. Its not totally straight, still about a half inch off but much better.. woo hoo

 

[jackobotz]

replaced front axle . axle seals , bearings , with 1987-2006 JEEP WRANGLER YJ TJ DANA 30 FRONT END USA 4340 CHROMOLY AXLE KIT, i got new in box for 150.00. I also changed center link and drag link. luckily ball joints were good or they would have went too. Also changed steering stabilizer. getting alighnment first thing in the am. Then i am off to see what else I can break.

 

[dmartin 847]

I turbo charged my Tj in November, has been running lean ever since then, I tried bigger injectors, tried everything.. Turns out the stupid fuel filter was bad. Now it has 50 psi fuel pressure and the air fuel gage reads perfect. Never ran better.

 

[Sahara707]

I turbo charged my Tj in November, has been running lean ever since then, I tried bigger injectors, tried everything.. Turns out the stupid fuel filter was bad. Now it has 50 psi fuel pressure and the air fuel gage reads perfect. Never ran better.

Cool! How about a picture of the engine/turbo?

 

[BaconYJ]

50psi?!?! holy crap that is a ton of boost!

Bacon

 

[BaconYJ]

Bah, I r read guuud. 50 psi fuel pressure not boost. :crazy:

Bacon

 

[dmartin 847]

 

[dmartin 847]

It took a lot of work, I run a large CNC machine shop so I did all the machine work myself, traded an old wood burner I had for the turbo, manifold, waste gate and blowoff valve. All together I think I have under $250 in it, dynoed at 208 hp at 6 psi boost. Still running the stock injectors and 9.5:1 compression so my low end didn't change , starts pulling pretty good around 2200rpm and I'm getting around 23 mpg..

 

[Sahara707]

Received the Poison Spyder Rock Sliders and started priming.

 

[dmartin 847]

This was an earlier picture when I was in the test stage but you can at least see the the neon srt turbo

 

[dmartin 847]

Received the Poison Spyder Rock Sliders and started priming.

Those are bad ass

 

[insufficient funds]

Finished my rack for the Jeep today

 

[wwch99tj]

Went for a ride
topless today then when I got home I decided to fix my upper slider window.

The outside trim piece had broken clips so it would flop in the wind...
I took a solder iron and melted it back together

Then I took a heat gun to the top of my door panel, it was starting to turn white like the front edge here

After a few mins of heat.

Sent from my Samsung Galaxy S3 using Jeepz

 

[mackdogman]

I installed new style tail lights. Next is finish my rear crossmember and replace my body bushings then get it painted.

 

[54cj3b]

just put my baby up for sale since I found out my cancer is back she deserves to be finished