Search results

yep i've learned most of what ya have there but... The T90 can be adapted to the Spicer 20 case with an adapter/output bearing retainer. do know who sells this.. i've been looking around for one... thanks !!!! :)

i've come across the same info, as far as shaft lenght and what models the small bore came with... not sure if a t-14 would bolt up... novak only offers a a np435 trans swap to the f head... it's a little larger then what i was hopping for

to ask the question, i have to tell you first were i'm at.. i have a cj 3b the stock gears at as follows 1st 2:79 4 lo 2:43 diff 5:38 total 36 to 1... i'm upping my input shaft, and gear cluster to get 1st up to 3:44. i want to do a tera 3.15 gear set in the dana 18 with the diffs 5:38 that...

oh i've been waiting for this.. i used them on my 4.0 works great.... now to do the 2.5 :) thanks

1 your axle is a lp dana 30 2 tools needed: big torque wrench over 200 foot pounds, and a inch pound wrench that shows the needle not a clicker type a press would be great to get the bearings on the pinion . and a good after noon to pull the axle shafts, carrier, then remove the pinion...

hope to see ya in 2 weeks :)

i do belive you have to pay for those, i'm sure they have a site that you can log on to to have it done...

yes, all the trails are guided. yes you can pick your group, green blue etc. and if it is too easy or hard you can bump up or down. the guides will help ya pick, based off what trails they are doing that day. the park is growing,( second full year open ) there is a full day of trails per color...

another pa jeeper !... hey see ya round... :)

you'll have a great time on the greens and low blue trails that are there, i was there in augest with my yj on 31's on street tread not even a/t's. we going to be up sat to make sure the trails are clean and passable move fallen trees etc.

last years pics.

rock run ohv park of westen pa. is back for the 3rd annual toy run, this year the date is dec. 13th 9am. 15$ per rig to get in, so bring the family.. they do ask for a 15$ donation worth of toys. we'll be on the trails by 10am. around 3pm there will be door prizes, and hot drinks. last year it...

welcome, old jeeps rock :D.... & rust :(

you can get floor pans, rockers, etc... can you weld, do your own work ? that will help keep the $$ down.... the chassis you speak of is a unibody, so being pa. it could be shot ??? i'm battling the rust on my wife's 02 wj:(, and lost it on my 93 xj :(:x

the rusty's kit i had was not so good, the rear springs sagged in 2 months, no customer service, either :(... i had to buy the extra leafs, then 2 years later snaped them on the road, bent like a S.... the front / rear springs others have bought went south as well.... so no more rustys, cheap is...

i'm gonna try and fit a 33 x 10.5 that might work, the 33 x 9.5 was too skinny for my 15 x8 rim, but had no issues for the 2 weeks it was there...

whoohho another wj guy...:D

31's tj flairs

stock with 235's

tj flairs